Trend Lines

When in View Data of a Skill Program or within the Analyze Data tab, a Customize option will show in the top right corner of the graph

Behaviors

When in View Data of a Behavior plan or within the Analyze Data tab, a Customize option will show in the top right corner of the graph

View & Analyze Data for Skills

When the user clicks on the customize option, they will have 2 options.

Users can only select one option at a time.

Customize Drop Down For Trend Lines in View Data and Analyze Data

1. To add a trend line across all phases of data (within the date range entered)

2. To add a trend line within each phase (within the date range entered).

Adding a trend line in View Data and Analyze Data

To add a trend line with one of the options, the user will check the check box.

Removing a trend line in View Data and Analyze Data

To remove a trend line from the graph, the user will uncheck the checkbox.

Calculation of Trend Lines

When calculating the trend line with either option, across all phases or within each phase, the system will use the following calcuation for the trend line:

y = mx + b

View Data Pop Up

• Increased size of pop up to make the user experience more efficient.

Date Range on View Data Pop Up (top of pop up)

• Date range to select a start and end date to view data

Default for data points shown within view data

• The date range of data shown in View Data has been changed to display the last 60 calendar days with data points shown.

• This is to assist with adding a trend line to view data if a significant amount of data has been entered for a specific skill/behavior.

• The date range can be changed at any point in time and trend lines can be added

• If a user is viewing view data with no data entered within the last 60 days, they will receive the following messaging.

  • “No data has been collected on this program in the last 60 days, in order to view data, please edit the date range.”

Combination Graphs and Trend Lines in View Data and Analyze Data

As a user, I can add a trend line to any combination graph with 3 or more data point entered.

• As a user, I will have the customize options of:

  • To add a trend line across all phases of data or To add a trend line within each phase.

  • Only one option can be applied at a time

Target Specific Graphs and Trend Lines in View Data and Analyze Data

• As a user, I can add a trend line to target specific graphs to view a trend line on a baseline graph and/or a specific target progress graph.

1. As a user, I will have the customize options of:

   • To add a trend line across all phases of data or To add a trend line within each phase.

     • Only one option can be applied at a time

   • GOOD TO KNOW!

     • When adding a trend line to target specific graphs, the trend lines will be applied to all target specific graphs selected.

.

Analyze Data with Skills

When using custom graph displays in analyze data, users will be able to set the custom option and then add a trend line.

Display by Trial Set, Day, Week, Month, Year

Custom Display by Data Collection Type: Total, Average, #/Hour, #/Min,

View Data and Analyze Data for Behavior Reduction Programs

• As a BCBA, I need to have the ability to add or remove a trend line from a graph in view data for all behavior reduction programs. This option will be shown above all graph types.

Customize Drop Down Option to Add a Trend Line

• When users have access to view data from both the behavior support area or from the data entry page and they have access to baseline, or intervention data for a behavior reduction program, they will see a customize option above the graph. This is where a trend line can be added.

Data Entry and View Data and Analyze Data

In order to add a trend line on a behavior reduction graph there is a minimum requirement of 3 data points.

If less than 3 data points are entered on the graph, the trend line option will be disabled.

View Data and Analyze Data Customize Drop Down

In view data, there is a tool tip to let the user know what the data point requirement is for enabling a trend line.

The tool tip states “To add a trend line, a minimum of 3 data points is required”.

View Data & Analyze Data for Behaviors

When the user clicks on the customize option, they will have 2 options.

Users can only select one option at a time.

Customize Drop Down For Trend Lines

1. To add a trend line across all phases of data (within the date range entered)

2. To add a trend line within each phase (within the date range entered).

Adding a trend line

To add a trend line with one of the options, the user will check the check box.

Removing a trend line

To remove a trend line from the graph, the user will uncheck the checkbox.

View Data Pop Up

• Increased size of pop up to make the user experience more efficient.

Date Range on View Data Pop Up (top of pop up)

• Date range to select a start and end date to view data

Default for data points shown within view data

• The date range of data shown in View Data has been changed to display the last 60 calendar days with data points shown.

• This is to assist with adding a trend line to view data if a significant amount of data has been entered for a specific skill/behavior.

• The date range can be changed at any point in time and trend lines can be added.

• If a user is viewing view data with no data entered within the last 60 days, they will receive the following messaging.

  • “No data has been collected on this program in the last 60 days, in order to view data, please edit the date range.”

Analyze Data with Behaviors

When using custom graph displays in analyze data with behaviors, users will be able to set the custom option and then add a trend line.

Display by Trial Set, Day, Week, Month, Year

Custom Display by Data Collection Type: Total, Average, Rate/Hour, Rate/Min, Etc.

Skills in View Data

As a user, when adding trend lines to a skill graph in view data, the image can be printed or exported from view data:

Printed from view data:

Users will have the option to print the Data and Graph which will have the trend line shown line shown on the image.

Export Graph Image Button will export the image as a PNG image with the trend line shown on the image.

Print Data & Graph (PDF)

Export Graph Image (PNG)

Behaviors in View Data

As a user, when adding trend lines to a behavior graph in view data, the image can be viewed as a full screen image

As a user, when adding trend lines to a behavior graph in view data, the image can be printed by clicking on the print chart option.

As a user, when adding trend lines to a behavior graph in view data and click on any of teh download option the image will be exported as one of the following: PNG, JPEG, PDF or SVG.

View as a FULL screen Image:

View as a Full Screen Image:

Print Option

PNG, JPEG, PDG, or SVG:

Skills and Behaviors in Analyze Data and Exports

As a user, when adding trend lines to a skill or behavior graph in analyze dat, the image can be exported with any of the existing export/print options available.

Once exported, the image will be shown with the trend line displayed as it is shown in Analyze data.

Skills:

Behaviors: